Mountain Bikers

Setting Up to Rail a Corner On Your Mountain Bike

Setting up to rail a corner on your mountain bike! Interesting braking and cornering question asked by one of our students:

“Just a quick follow up question.  I have been having a problem getting out of position before cornering, primarily caused by hard braking (especially if there is rough terrain before the corner or if I come in too hot).  As I brake, my body gets behind the center and lower as well, and by the time I start entering the corner, I am out of the “attack” position.  My front wheel feels light, and it becomes difficult to get in the correct cornering body position.

If you have suggestions as to how to properly transition from braking into cornering (especially under hard braking), I would appreciate it.”

Interesting question, this is a common problem with riders of all experience levels. I spent a lot of time working on the same issue a few years ago and still practice braking a couple of times a week for this reason. The problem stems from getting back while you brake, getting low is good but we need to stay  centered so when we release the brakes and the bike accelerates we are centered and ready to attack the corner. Although we stress a centered braking position in our skills progressions I was taught the old school, “get way back while you brake” and it is plain instinctual to move away from danger. Staying centered while braking took me a while to master and if I stop practicing it I find myself reverting to scooting back as I brake. Scooting back does help the rear brake a bit but actually hurts the effectiveness of the much more powerful front brake.   Getting back also puts you out of balance and makes it hard to corner correctly.  A great on trail drill is to focus on staying centered as you brake for a corner. Use A LOT of front brake, only brake in a straight line before the corner and then let off and attack the corner.

 

Rail a Corner on your mountain bike

BetterRide student Matt showing proper body position (centered and neutral) for descending and braking.

Stay centered and you will brake more effectively. When working with World Champion Greg Minnaar he really stresses this. It sounds scary but once you do it you realize two things: 1. you can brake in a much shorter distance with more control (less front wheel slide) 2. you are in a much better position to corner when you let off the brakes. This is another reason to practice the braking drills from the camp you took with us.

One of our fastest students, Cody Kelly (who won the Sea Otter Dual Slalom this year) told me that he now wears out two sets of front brake pads for every set of rear pads! That should be every riders goal! The steeper and/or looser the terrain the more you have to rely on your front brake.

As always it comes down to doing drills to master skills then practicing with purpose and a focus on quality! Have you practiced the braking drill from our mini-course recently?

Pro Tip:  Now that you are in the right body position where and how you do you braking is very important. ALWAYS brake in a straight line! In other words, finish your braking before you start your corner! Your tires can’t multitask, asking them to slow you down in one direction while asking them to change direction at the same time is a recipe for disaster. Have you noticed all those braking bumps on the entrance to the corner? Well, why are you riding in them? Usually there is a nice smooth section of trail just to the outside of those braking bumps, use the smooth part of the trail!

Create a railed corner (or two)! Stay tuned for next weeks article on line choice for cornering!

Social Comments:

Website Comments:

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *